XD Flanged Reducer
XD Flanged Reducer 14ga provide easy transition from one size of duct pipe or fitting to a smaller size. They are used in Ducting Systems requiring dust or fume removal and for highly abrasive applications that are high wear.
Login or Create an Account to get Pricing for this part and to Build a Bill of Material List for your Ducting project.
Extra Durable XD Flanged Reducer 14 gauge provide easy transition from one size of duct pipe or fitting to a smaller size. They are used in Ducting Systems requiring dust or fume removal and for highly abrasive applications that are high wear.
XD Flanged Reducers 14ga are manufactured as follows:
- In 14 gauge galvanized steel with diameter sizes of 8 to 48 inches
- Flanged ends come standard with Angle Flanges (ANGFL), retained with a 5/8 inch vanstone lip. They are attached loosely in order that the flanges can be rotated for bolt alignment. Flange can be fully welded upon request.
- Length in inches = A-B+6 for Reducers with QF or RAW ends with a 7 inch minimum.
- Length in inches = A-B+8 for Reducers with (ANGFL) or (FFL) ends with a 9 inch minimum.
| Pipe | Flange | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Size
in. |
Wgt.
lbs. |
OD
in. |
ID
in. |
Hgt. (H)
in. |
Thk. (T)
in. |
ID
in. |
B.C.
in. |
OD
in. |
Bolts
# |
Hole Dia.
in. |
| 8 | 9.1 | 7.93 | 7.77 | 1.25 | 0.1250 | 8.13 | 9.56 | 10.63 | 6 | 0.375 |
| 9 | 11.25 | 8.92 | 8.76 | 1.25 | 0.1250 | 9.13 | 10.63 | 11.63 | 6 | 0.438 |
| 10 | 13.26 | 9.93 | 9.77 | 1.25 | 0.1250 | 10.13 | 11.81 | 12.63 | 6 | 0.438 |
| 11 | 14.35 | 10.92 | 10.76 | 1.25 | 0.1250 | 11.13 | 12.75 | 13.63 | 6 | 0.438 |
| 12 | 16.78 | 11.99 | 11.83 | 1.50 | 0.1250 | 12.13 | 14.00 | 15.13 | 8 | 0.438 |
| 13 | 17.93 | 13.00 | 12.84 | 1.50 | 0.1250 | 13.13 | 15.00 | 16.13 | 8 | 0.438 |
| 14 | 20.95 | 13.99 | 13.83 | 1.50 | 0.1250 | 14.13 | 16.00 | 17.13 | 8 | 0.438 |
| 15 | 25.97 | 14.99 | 14.83 | 1.50 | 0.1250 | 15.13 | 17.00 | 18.13 | 8 | 0.438 |
| 16 | 29 | 16.00 | 15.84 | 1.50 | 0.1875 | 16.13 | 18.00 | 19.13 | 8 | 0.438 |
| 17 | 31.05 | 17.00 | 16.84 | 1.50 | 0.1875 | 17.13 | 19.00 | 20.13 | 8 | 0.438 |
| 18 | 33.7 | 17.99 | 17.83 | 1.50 | 0.1875 | 18.13 | 20.00 | 21.13 | 8 | 0.438 |
| 20 | 45.5 | 20.00 | 19.84 | 1.50 | 0.1875 | 20.13 | 21.75 | 23.13 | 12 | 0.438 |
| 22 | 52.75 | 22.01 | 21.85 | 1.50 | 0.1875 | 22.13 | 23.75 | 25.13 | 12 | 0.438 |
| 24 | 58.9 | 23.98 | 23.82 | 1.50 | 0.1875 | 24.13 | 25.88 | 27.13 | 12 | 0.438 |
| 26 | 105.55 | 26.07 | 25.91 | 2.00 | 0.1875 | 26.13 | 28.38 | 30.13 | 16 | 0.438 |
| 28 | 133.2 | 28.07 | 27.91 | 2.00 | 0.1875 | 28.13 | 30.38 | 32.13 | 16 | 0.438 |
| 30 | 159.96 | 30.06 | 29.90 | 2.00 | 0.1875 | 30.13 | 32.38 | 34.13 | 16 | 0.438 |
| 32 | 171.88 | 32.06 | 31.90 | 2.00 | 0.1875 | 32.13 | 34.38 | 36.13 | 16 | 0.438 |
| 34 | 183.8 | 33.93 | 33.77 | 2.00 | 0.1875 | 34.13 | 36.38 | 38.13 | 16 | 0.438 |
| 36 | 194.34 | 36.06 | 35.90 | 2.00 | 0.1875 | 36.13 | 38.38 | 40.13 | 16 | 0.438 |
| 38 | 208.66 | 38.08 | 37.92 | 2.00 | 0.1875 | 38.13 | 40.38 | 42.13 | 24 | 0.438 |
| 40 | 221.56 | 40.08 | 39.92 | 2.00 | 0.1875 | 40.13 | 42.38 | 44.13 | 24 | 0.438 |
| 42 | 234 | 42.07 | 41.91 | 2.00 | 0.1875 | 42.13 | 44.38 | 46.13 | 24 | 0.438 |
| 44 | 247 | 44.08 | 43.92 | 2.00 | 0.1875 | 44.13 | 46.38 | 48.13 | 24 | 0.438 |
| 46 | 261 | 46.08 | 45.92 | 2.00 | 0.1875 | 46.13 | 48.38 | 50.13 | 24 | 0.438 |
| 48 | 276 | 48.09 | 47.93 | 2.00 | 0.1875 | 48.13 | 50.38 | 52.13 | 24 | 0.438 |
Galvanized Gauge Metal Thickness
| Gauge | Inches | Millimeters |
|---|---|---|
| 14 | 0.0785 | 1.994 |
NOTES:
- At temperatures ranging between 390° F and 480° F, the zinc-iron alloy layers in the galvanized steel will continue to provide a high level of protection from corrosion. However, there may be some peeling, changes in mechanical properties, and reduction in the corrosion protection. Recommended maximum service temperature is 390° F.
| Item | Material | Compliance/Rating |
|---|---|---|
| XD Flanged Reducer | Galvanized | ASTM A527 with a G-90 Rating |