Special Applications

  1. Picture of a ductwork Leak-Free Gasket
    Leak-Free Gasket

    Leak Free Molded Gaskets are used and work well in many oil, water and hydraulic fluid applications, but should not be used with solvents such as acetone, MEK, ozone, chlorinated hydrocarbons, and nitro hydrocarbons.

  2. Picture of a ductwork Leak Free O-Ring
    Leak-Free O-ring

    The Leak Free O-rings are used in oil mist applications and perform well with many oils and chemicals. They are available in 3 to 24” diameters with a temperature rating of -30° to +225° F.

  3. Picture of a QF ductwork Oil Mist Recycler
    QF Oil Mist Recycler

    QF Oil Mist Recyclers are used to extract oil to minimize amount of oil flowing through entire system and can extend filter media life, reduce maintenance costs, and decrease issues caused by capturing and transporting large volumes of liquids to the collector. The Oil Mist Recyclers consists of the recycler unit, molded gasket, clamp and end cap, and a 5” clear hose with hose clamp provided for drain tap.

  4. Picture of a QF ductwork In-Line Spark Trap
    QF In-line Spark Trap

    QF In-Line Spark Traps are installed as a part of a dust collection system as a simple, low-cost tool that can reduce incidents of fire events, reducing costs, disruptions and improving safety. They can quickly and easily be mounted into Quick-Fit ducting systems, or other duct systems with use of a QF adapter, and the trap can easily be removed for cleanout. In-Line Spark Traps are not a primary safety device and does not replace spark detection or explosion isolation. They are manufactured in 4 to 24” diameters, 22, 20 and 18 ga. Galv. or SS304.

  5. Picture of a ductwork Flanged In-Line Spark Trap
    Flanged In-line Spark Trap

    Flanged In-Line Spark Traps are installed as a part of a dust collection system as a simple, low-cost tool that can reduce incidents of fire events, reducing costs, disruptions and improving safety. They can quickly and easily be mounted into Quick-Fit ducting systems, or other duct systems with use of a QF adapter, and the trap can easily be removed for cleanout. In-Line Spark Traps are not a primary safety device and does not replace spark detection or explosion isolation. They are manufactured in 4 to 24” diameters, 22, 20 and 18 ga. Galv. or SS.

Copyright © 2018 QF Ducting. All rights reserved.