Adapters

  1. Picture of a QF ductwork Reducer
    QF Reducer

    QF Reducers provide easy transition from one size of duct pipe or fitting to a smaller size. They are manufactured in 3 to 40" diameters with galvanized or 304SS metal.

  2. Picture of a QF ductwork Hose Adapter
    QF Hose Adapter

    QF Hose Adapters with QF rolled ends provide connection with QF ductwork to flex hose. For use with flexible rubber hose or Static Dissipative Urethane Hose. Longitudinal seam is solid laser welded. QF branches come in galvanized or 304SS metal. Branches over 24 inches come in Flanged only along with 14 gauge galvanized metal which is on the XD product line.

  3. Picture of QF ductwork Angle Flange Adapter
    QF Angle Flange Adapter

    QF Angle Flange Adapters are fitted with an industry standard Angle flange on one end and a QF rolled edge at the other, allowing quick connection of QF duct pipe or fittings to flanged pipes or fittings. Longitudinal seam is solid welded. QF Angle Flange Adapters come in galvanized or 304SS metal. On the XD product line, the Angle Flange Adapter is manufactured in 14gauge galvanized metal.

  4. Picture of a QF ductwork Transition Rectangle to Round
    QF Transition Rectangular to Round

    Transitions Rectangle to Round are for transitioning round ductwork to rectangular ductwork, or can be used as a hood.

  5. Picture of a QF ductwork Machine Adapter
    QF Machine Adapter

    QF Machine Adapters allow easy connection of QF ductwork to machines requiring dust or fume removal. Ends are QF (rolled edge) to NOFIT (plain edge). Longitudinal seam is solid laser welded. QF Machine Adapters come in galvanized or 304SS metal. Adapters over 24 inches come in Flanged only along with 14 gauge galvanized metal which is on the XD product line.

  6. Picture of a QF ductwork End Cap
    QF End Cap

    QF End Caps connect easily with the QF clamp and are used to cap-off an unused ducting port. They are ideal for future expansion or when a machine has been moved. All End Caps come standard with a rolled edge and are limited up 24″. QF End Caps are manufactured in galvanized or 304SS metal with a standard 20 to 22ga and an optional 18 or 16ga Galvanized. End Caps also are available in 14ga galvanized metal in the XD line.

  7. Picture of a QF ductwork End Cap with Bird Screen
    QF End Cap With Bird Screen

    QF End Caps with Bird Screen connect easily with the QF clamp and are used in situations where openings are needed to allow air to enter or exit a system. The bird screen keeps foreign objects from entering the system. The bird screen is constructed galvanized wire mesh in a 1/2″ square pattern crimped into place, or it can be replaced with a perforated metal sheet. QF End Caps with Bird Screen come standard up to 24"with a rolled edge. QF End Caps are manufactured in galvanized or 304SS metal with a standard 20ga to 22ga and an optional 18ga or 16ga Galvanized Steel.

  8. Picture a ductwork Angle Flange
    Angle Flange

    QF Angle Flanges used with QF Angle Flange Adapters can easily be used to connect other Norfab Quick-Fit Ducting components to existing flanged ductwork. QF Angle Flanges come in industry standard sizes and hole patterns and manufactured using Galvanized or Stainless-steel metal. Hardware must be supplied by customer.

  9. Picture of a ductwork Angle Flange Gasket.
    Angle Flange Gasket

    Angle Flange Gaskets are used with AF Flanges and AF Flange Adapters, one per joint.

Copyright © 2018 QF Ducting. All rights reserved.