Hoods

  1. Picture of a QF ductwork Bell Mouth Hood
    QF Bell Mouth Hood

    QF Bell Mouth Hoods are small hoods used for local exhaust ventilation and are especially good for capturing fumes and dusts while providing a very low hood entry loss. They are economically priced and can be quickly produced and available in a wide range of sizes, from 3 to 24”. The QF (rolled edge) end allows quick connection to duct fittings. The bell begins as 18ga and thickness cannot be changed. Collars are constructed of galvanize metal standard 22 or 20ga with an optional 18ga, and are also available in 304SS standard 22ga with an optional 20ga.

  2. Picture of a QF ductwork Canopy Hood
    QF Canopy Hood

    Canopy Hoods are small hoods for local exhaust ventilation. QF hoods are manufactured standard with 20ga galv. or optional 20 ga 304SS. Square ends are hemmed and come in standard sizes of 18″, 24″, 36″, or 48″ square. Round ends come standard QF in sizes 16 and 18 inches. Hood Design Basis is 150 fpm capture velocity, with a 2 ft distance from source. In the XD line

  3. Picture of a QF ductwork Barrel Hood
    QF Barrel Hood

    QF Barrel Hoods are small hoods for local exhaust ventilation. QF hoods are manufactured standard with a Galv. or 304SS 20 ga or optional 18 ga. Choose the takeoff size of 4″, 6″, or 8″, depending on your material. Pre-engineered and ready to use. Ends come Standard QF.

  4. Picture oif a QF ductwork Router Hood
    QF Router Hood

    QF Router Hoods are small hoods for local exhaust ventilation. Dimensionally they are very similar to surface grinder hoods and are often used as a replacement, with a standard 6″ x 12″ opening. QF hoods are manufactured standard with 20ga galv. or optional 20ga 304SS. Square ends are hemmed. Round ends come standard QF.

  5. Picture of a QF ductwork Router Hood with Magnets
    QF Router Hood With Magnet

    QF Router Hoods with Magnets are small hoods for local exhaust ventilation. Dimensionally they are very similar to surface grinder hoods and are often used as a replacement, with a standard 6″ x 12″ opening. QF Router Hoods with Magnets allows the user to easily place the hood where desired and are manufactured standard with 20ga galv., or optional 20ga 304SS. Magnet is not available in Stainless Steel. Square ends are hemmed. Round ends come standard QF.

  6. QF Radial Arm Saw Hood
    QF Radial Arm Saw Hood

    QF Radial Arm Hoods are economically priced small hoods used for local exhaust ventilation and can be quickly produced. These Hoods are specifically designed to be used to collect dust from Radial Arm Saws. Collars and transitions are 20ga with 18ga for rest of body and are manufactured standard galv. with an option of 304SS Steel. Ends are Standard QF rolled edge with an inner diameter of 4,5, or 6”.

Copyright © 2018 QF Ducting. All rights reserved.