Products

Items 1 to 30 of 113 total

Page
  1. Unistrut Ducting Clamp
    Unistrut Clamp

    Cut Installation Times dramatically on Industrial Ductwork Systems when using these Clamps with Unistrut channel.

  2. Picture of QF Ductwork Pipe
    QF Pipe

    QF pipe is laser-welded ducting and has rolled ends for quick assembly. It requires no tools, as you only need to use clamps to connect the pipes and fittings together. When used with an adjustable nipple, straight pipe runs can be generally estimated and cut-to-fit upon installation. Pipe lengths are approximately 5 feet and have diameters from 3 inches to 24 inches.

  3. Picture of a QF ductworjk Elbow
    QF Elbow

    Standard QF and Long Radius Elbows are available in standard bend angles of 90°, 60°, 45°, and 30° bends. Elbows from 3 to 7 inches in diameter are press formed; elbows greater than 8-inch diameter are segmented elbows. QF Elbows come in galvanized and 304SS.

  4. Picture of QF Ductwork Adjustable Nipple With O-Ring
    QF Adjustable Nipple With O-Ring

    The Quick-Fit Adjustable Nipple comes with an O-Ring, and together they are used as an adjustable sleeve to provide variable length adjustments in QF straight pipe. Using this nipple, any straight pipe length can be attained using a number of QF Pipes clamped together with the adjustment nipple.

  5. Picture of a QF ductwork Reducer
    QF Reducer

    QF Reducers provide easy transition from one size of duct pipe or fitting to a smaller size. They are manufactured in 3 to 40" diameters with galvanized or 304SS metal.

  6. Picture of a QF Ductwork Clamp
    QF Duct Clamp

    QF Clamps are used as an easy and quick way to connect QF Pipe and other QF fittings together. Clamps come with an internal seal and a cotter pin to lock the clamp in the closed position. Clamps are made from galvanized or 304SS, and come with nitrile seals (silicone and ePTFE optional).

  7. Picture of a QF ductwork Branch
    QF Branch

    Quick-Fit Duct Branches, also known as wyes or laterals are added typically to accommodate an additional line or lines into the main one. Quick-Fit Branches are standard 30° with a 45° option. QF branches come in galvanized or 304SS metal.

  8. Picture of a QF ductwork Machine Adapter
    QF Machine Adapter

    QF Machine Adapters allow easy connection of QF ductwork to machines requiring dust or fume removal. Ends are QF (rolled edge) to NOFIT (plain edge). Longitudinal seam is solid laser welded. QF Machine Adapters come in galvanized or 304SS metal. Adapters over 24 inches come in Flanged only along with 14 gauge galvanized metal which is on the XD product line.

  9. Picture of a QF ductwork T-Branch
    QF T-Branch

    QF T-Branches are added to accommodate an additional line which goes into the main one at a 90° angle. T-Branches are manufactured with QF rolled ends and come in galvanized or 304SS metal. T-Branches over 24 inches come in Flanged only.

  10. Picture of a QF ductwork Hose Adapter
    QF Hose Adapter

    QF Hose Adapters with QF rolled ends provide connection with QF ductwork to flex hose. For use with flexible rubber hose or Static Dissipative Urethane Hose. Longitudinal seam is solid laser welded. QF branches come in galvanized or 304SS metal. Branches over 24 inches come in Flanged only along with 14 gauge galvanized metal which is on the XD product line.

  11. Picture of QF ductwork Angle Flange Adapter
    QF Angle Flange Adapter

    QF Angle Flange Adapters are fitted with an industry standard Angle flange on one end and a QF rolled edge at the other, allowing quick connection of QF duct pipe or fittings to flanged pipes or fittings. Longitudinal seam is solid welded. QF Angle Flange Adapters come in galvanized or 304SS metal. On the XD product line, the Angle Flange Adapter is manufactured in 14gauge galvanized metal.

  12. Picture of a QF ductwork End Cap
    QF End Cap

    QF End Caps connect easily with the QF clamp and are used to cap-off an unused ducting port. They are ideal for future expansion or when a machine has been moved. All End Caps come standard with a rolled edge and are limited up 24″. QF End Caps are manufactured in galvanized or 304SS metal with a standard 20 to 22ga and an optional 18 or 16ga Galvanized. End Caps also are available in 14ga galvanized metal in the XD line.

  13. Picture of a QF ductwork Transition Rectangle to Round
    QF Transition Rectangular to Round

    Transitions Rectangle to Round are for transitioning round ductwork to rectangular ductwork, or can be used as a hood.

  14. Picture of a ductwork Angle Flange Gasket.
    Angle Flange Gasket

    Angle Flange Gaskets are used with AF Flanges and AF Flange Adapters, one per joint.

  15. Picture of a QF ductwork End Cap with Bird Screen
    QF End Cap With Bird Screen

    QF End Caps with Bird Screen connect easily with the QF clamp and are used in situations where openings are needed to allow air to enter or exit a system. The bird screen keeps foreign objects from entering the system. The bird screen is constructed galvanized wire mesh in a 1/2″ square pattern crimped into place, or it can be replaced with a perforated metal sheet. QF End Caps with Bird Screen come standard up to 24"with a rolled edge. QF End Caps are manufactured in galvanized or 304SS metal with a standard 20ga to 22ga and an optional 18ga or 16ga Galvanized Steel.

  16. Picture of a QF ductwork In-Cut
    QF In-Cut

    QF In-cut Branches with QF rolled ends are available as standard 30°, optional 45°, and are used to cut into existing duct lines to begin a QF section in the system. QF Incut branches come in galvanized or 304SS metal.

  17. Picture of a QF ductwork Tap-In
    QF Tap-In

    QF Tap-In Branch fittings are used to cut into existing duct lines at 90° to begin a Quick-Fit (QF) section in the system. Tap-In Branches are manufactured with QF rolled ends and come in galvanized or 304SS metal.

  18. Picture of a QF ductwork Y-Branch
    QF Y-Branch

    QF Duct Y-Branches, also known as true wyes are added typically to accommodate an additional line or lines into the main one. All Y branches come standard in 60 degrees or an optional 90 degrees and are manufactured in Galvanized or Stainless-steel metal.

  19. Picture of a QF ductwork Jet Cap
    QF Jet Cap

    The QF Jet Cap is used to prevent rain from entering. The Inner funnel piece allows rain to drain out of ductwork even when system is not running. There are 3 angle brackets for guy wire attachment. They install in seconds with a Standard QF Clamp. QF Jet Caps are manufactured in 3 to 24” in diameter with 20 and 22 ga., Galv. or 304SS.

  20. Picture of a QF ductwork Vibration Isolator
    QF Vibration Isolator

    The QF Vibration Isolator is used to reduce vibrations from the fan to the ducting system. They are manufactured in 3 to 40 inch diameters, with 18, 20 or 22 ga. Galvanized or 304SS, and in lengths of 6.5,7 and 10“ based on the diameter.

  21. Picture of a QF ductwork Viewing Spool
    QF Viewing Spool

    QF Viewing Spools are used to allow a view of material flow and consist of a QF duct with a section of acrylic glass with 3/8” threaded rods. They are manufactured in 3 to 18” diameter, 22, and 20 ga. Galv. or 304SS, with an optional 18 ga. Galv., all in 12.5” lengths.

  22. Picture of a ductwork No-Loss Stackhead
    No-Loss Stackhead

    QF No- Loss Stackheads are used to eliminate back pressure on fans when exhausting from fans or stacks through the roofs, while also providing weather protection. Stackheads come with Flange for guy wire attachment. QF No-Loss Stackheads are manufactured in 3 to 24” in diameter with 20 and 22 ga., Galv. or 304SS.

  23. Picture of a ductwork Silencer
    Silencer

    QF Silencers can significantly reduce the noise in a dust collection system, improving sound levels from fans and equipment. Due to varying applications, no decibel testing has been performed on this product. Silencers are manufactured in Galv. or 304SS.

  24. Picture of a ductwork Sliding Access Panel
    Sliding Access Panel

    QF Sliding Access Panels (SAP) are used to allow access without removable of pipe, with the length equal to the nominal pipe length. They allow users easy, tool-free ducting access to clean out any clogs or gain access to spark detection/suppression equipment. The inside of the SAP is extremely smooth and tag-free.

  25. Picture of a Ductwork Clamp with Pin QF ePTFE Seal
    Clamp With Pin QF ePTFE Seal

    Clamps with Pin QF ePTFE Seal are used as an easy and quick way to connect QF Pipe and other QF fittings together for applications requiring higher temperatures. Clamps come with an internal seal and a cotter pin to lock the clamp in the closed position, and are made from galvanized or 304SS metal.

  26. Picture of a Ductwork Clamp with QF Silicone Seal
    Clamp With QF Silicone Seal

    Clamp with Silicone Seal is used as an easy and quick way to connect QF Pipe and other QF fittings together. Clamps come with an internal seal and a cotter pin to lock the clamp in the closed position. Clamps are made from galvanized or 304SS.

  27. Picture of Ductwork O-Rings
    O-Ring

    QF O-rings are provided with QF Adjustable Nipples to provide a seal when the nipple is slipped over a QF Pipe that is cut to length. Any length of straight pipe can be attained with this nipple.

  28. Picture of a  Ductwork Adjustable Nipple 18 Gauge
    Adjustable Nipple 18ga

    18 gauge QF Adjustable Nipple should be specified for length adjustments when using 18 gauge pipe. Includes black nitrile O-ring for sealing (red silicone available for high temperature applications). Only made in galvanized steel.

  29. Picture of a Ductwork Flanged Pipe 16 Gauge
    Flanged Pipe 16ga

    Flanged Pipe 16 ga. is available for applications that require pipes in diameters larger than 24" or pipe with flanged connections. This flange pipe is manufactured in galv. or 304SS metal and constructed with a laser plasma weld that provides a leak-free seal along the length of the pipe.

  30. Picture of a Ductwork Flanged Pipe LW
    Flanged Pipe LW

    Galvanized and 304SS Flanged Pipe is available in all sizes for applications requiring flanged pipe. Pipes have a laser plasma seam, which reduces leaks and internal retention of material. Flanged pipe comes in standard gauge thickness, and is available in 16 ga., or up to 12 ga. in the XD product line.

Items 1 to 30 of 113 total

Page
Copyright © 2018 QF Ducting. All rights reserved.