QF Manual Diverter Valve

QF Manual Diverter Valves are a high efficiency and economical method of diverting flow of material or air. The housing is constructed of heavy 3/16" thick painted Black metal, with welded seams and transitions standard with QF ends in Black Metal or optional SS304.
Login or Create an Account to get Pricing for this part and to Build a Bill of Material List for your Ducting project.

Quick Fit Manual Diverter Valves are a high efficiency and economical method of diverting flow of material or air. Airflow can be reversed in fabrication upon request.

QF Auto Diverter Valves are manufactured as follows:

  • The Diverter Valve housing is constructed of heavy 3/16 inch thick painted Black metal, with welded seams and transitions standard with QF ends in diameters of 3 to 24 inches made with Black Metal or optional Stainless-Steel.
  • They are supplied with heavy duty flange bearings and rubber seal in a 14 gauge steel door. Rubber seal is ΒΌ inch thick polymer compound #AB-3205

Heavier gauge metal options are available in the XD line.

  • QF ends can be changed to Raw with a defined ID dimension (RawID), Raw with a defined OD dimension (RawOD), No Fitting or just a raw end (NoFit), Flexible hose adapter (RawFlex), Flat Flange (FFL), Angle Flange (ANGFL), or Van Stone (VanStone).
Size
in.
Wgt.
lbs
(L)
in.
(A)
in.
(B)
in.
3 15.0 26.00 6 14.00
4 20.0 26.00 6 14.00
5 30.0 27.25 6 15.25
6 44.0 28.00 6 16.00
7 60.0 28.00 6 16.00
8 66.5 29.00 6 17.00
9 85.4 34.00 6 18.00
10 100.0 36.00 8 20.00
11 115.0 36.00 8 20.00
12 130.0 40.00 8 24.00
13 146.5 40.00 8 24.00
14 170.0 44.00 8 28.00
15 190.0 44.00 8 28.00
16 220.0 48.00 8 32.00
17 337.0 48.00 8 32.00
18 392.0 52.00 8 36.00
20 447.0 60.00 10 40.00
22 522.5 61.25 10 41.25
24 625.1 68.00 10 48.00
NOTES:
  1. At temperatures ranging between 390° F and 480° F, the zinc-iron alloy layers in the galvanized steel will continue to provide a high level of protection from corrosion. However, there may be some peeling, changes in mechanical properties, and reduction in the corrosion protection. Recommended maximum service temperature is 390° F.
  2. For 304 SS metal, bluing may occur at temperatures of 800° F and above.
  3. Rock River Silicone Sealant and Red Devil HVAC/R High Temperature Silicone Sealant are not able to be painted.
Item Material Compliance/Rating
QF Manual Diverter Valve Black Metal ASTM A36
304 SS Finish meets ASTM A240
316 SS Finish meets ASTM A240
3M Scotch Seal Metal Sealant 2084 Acetone blend AAMA Specification 801.1
Rock River Silicone Sealant 100% Silicone ASTM C920 Class 25
TT-S-00230C Class A and TT-S-001543A
FDA No. 421 CFR 117.2600, conforms to FDA requirements
Red Devil HVAC/R High Temperature Silicone Sealant Silicone ASTM C920 Class 25
TT-S-00230C Class A and TT-S-001543A
CEBTP 432.6 140-2
Mil Spec 46106A
CGSB 19C9-9B
DIN 18540 Part 2
OREX 150031-2
Copyright © 2018 QF Ducting. All rights reserved.