QF Floor Sweep
QF Floor Sweeps are attached to ducting systems via a clamp and provide a quick, easy way to dispose of dust in a shop or manufacturing plant. They can be used for other applications as well, such as a paper trim/dust collection system. QF Floor sweep ID’s are 3 to 12” and are manufactured in 20ga., standard Galv., or optional 304SS.
Login or Create an Account to get Pricing for this part and to Build a Bill of Material List for your Ducting project.
Quick Fit Floor Sweeps are attached to ducting systems via a clamp and provide a quick, easy way to dispose of dust in a shop or manufacturing plant. They can be used for other applications as well, such as a paper trim/dust collection system.
QF Floor Sweeps are manufactured as follows:
- In 3 to 12 inches Diameters with 20 gauge, standard Galvanize or optional 304SS Stainless Steel
- The body is lapped, spot welded and caulked and comes with a 16 gauge metal sturdy closing door
- Collars have a laser welded longitudinal seam, and are attached to the body using a raised hemmed, spot welded seamed construction and caulked
- Standard QF Rolled Edge ends can be changed to Raw with a defined ID dimension (RawID), Raw with a defined OD dimension (RawOD), No Fitting or just a raw end (NoFit), Flexible hose adapter (RawFlex), Flat Flange (FFL), Angle Flange (ANGFL), or Van Stone (VanStone).
| Size
in. |
Weight
lbs. |
OD
in. |
ID
in. |
Rolled Edge
nom. in. |
|---|---|---|---|---|
| 3 | 5.80 | 3.07 | 3.00 | 0.2 |
| 4 | 6.90 | 3.89 | 3.82 | 0.2 |
| 5 | 7.30 | 4.91 | 4.84 | 0.2 |
| 6 | 7.55 | 5.93 | 5.86 | 0.2 |
| 7 | 7.75 | 6.94 | 6.87 | 0.3 |
| 8 | 8.25 | 7.93 | 7.86 | 0.3 |
| 9 | 9.50 | 8.92 | 8.85 | 0.3 |
| 10 | 11.75 | 9.93 | 9.86 | 0.3 |
| 11 | 13.20 | 10.92 | 10.85 | 0.3 |
| 12 | 15.70 | 11.99 | 11.92 | 0.4 |
Galvanized Gauge Metal Thickness
| Gauge | Inches | Millimeters |
|---|---|---|
| 20 | 0.0396 | 1.006 |
Stainless Gauge Metal Thickness
| Gauge | Inches | Millimeters |
|---|---|---|
| 20 | 0.0375 | 0.953 |
NOTES:
- At temperatures ranging between 390° F and 480° F, the zinc-iron alloy layers in the galvanized steel will continue to provide a high level of protection from corrosion. However, there may be some peeling, changes in mechanical properties, and reduction in the corrosion protection. Recommended maximum service temperature is 390° F.
- For 304 SS metal, bluing may occur at temperatures of 800° F and above.
- Rock River Silicone Sealant and Red Devil HVAC/R High Temperature Silicone Sealant are not able to be painted.
| Item | Material | Compliance/Rating |
|---|---|---|
| QF Floor Sweep | Galvanized | ASTM A653 with a G-90 Rating |
| 304 SS | Finish meets ASTM A240 | |
| 316 SS | Finish meets ASTM A240 | |
| 3M Scotch Seal Metal Sealant 2084 | Acetone blend | AAMA Specification 801.1 |
| 3M Polyurethane Sealant 560 | Polyurethane | ASTM E 162 Bombardier SP 800-C |
| Rock River Silicone Sealant | 100% Silicone | ASTM C920 Class 25 TT-S-00230C Class A and TT-S-001543A FDA No. 421 CFR 117.2600, conforms to FDA requirements |
| Red Devil HVAC/R High Temperature Silicone Sealant | Silicone | ASTM C920 Class 25 TT-S-00230C Class A and TT-S-001543A CEBTP 432.6 140-2 Mil Spec 46106A CGSB 19C9-9B DIN 18540 Part 2 OREX 150031-2 |