QF Barrel Hood

QF Barrel Hoods are small hoods for local exhaust ventilation. QF hoods are manufactured standard with a Galv. or 304SS 20 ga or optional 18 ga. Choose the takeoff size of 4″, 6″, or 8″, depending on your material. Pre-engineered and ready to use. Ends come Standard QF.
Login or Create an Account to get Pricing for this part and to Build a Bill of Material List for your Ducting project.

QF Barrel Hoods are small hoods for local exhaust ventilation. They are economically priced and can be quickly produced and are available in standard sizes for standard pricing and quick turnaround. QF Barrel Hoods are designed to fit 55 gallon drums and provide a fast connection to Quick-Fit duct work for dust removal in barrel-filling applications.

QF Barrel Hoods are manufactured as followed

  • With standard Galvanized or Stainless Steel 20 gauge with an optional 18 gauge

  • Take off sizes of 4,6, or 8 inches are available, pre-engineered and ready to use.
  • Comes Standard with Quick Fit ends and Seams are lapped, spot welded, and caulked.
  • Construction: Barrel Hoods are measured at a weight of 14.50 Lbs and have a rolled edge of a nominal .2 inches.
  • Standard QF ends can be changed to Raw with a defined ID dimension (RawID), Raw with a defined OD dimension (RawOD), No Fitting or just a raw end (NoFit), Flexible hose adapter (RawFlex), Flat Flange (FFL), Angle Flange (ANGFL), or Van Stone (VanStone).
Size
in.
Galvanized
ga.
304SS
ga.
Collar ID
in.
4 20 [18] 20 [18] 3.93
6 20 [18] 20 [18] 5.96
8 20 [18] 20 [18] 7.95
Galvanized Gauge Metal Thickness
Gauge Inches Millimeters
20 0.0396 1.01
18 0.0516 1.31
Stainless Gauge Metal Thickness
Gauge Inches Millimeters
20 0.0375 0.95
18 0.050 1.276
NOTES:
  1. At temperatures ranging between 390° F and 480° F, the zinc-iron alloy layers in the galvanized steel will continue to provide a high level of protection from corrosion. However, there may be some peeling, changes in mechanical properties, and reduction in the corrosion protection. Recommended maximum service temperature is 390° F.
  2. For 304 SS metal, bluing may occur at temperatures of 800° F and above.
  3. Rock River Silicone Sealant and Red Devil HVAC/R High Temperature Silicone Sealant are not able to be painted.
Item Material Compliance/Rating
QF Barrel Hood Galvanized ASTM A653 with a G-90 Rating
304 SS Finish meets ASTM A240
316 SS Finish meets ASTM A240
3M Scotch Seal Metal Sealant 2084 Acetone blend AAMA Specification 801.1
3M Polyurethane Sealant 560 Polyurethane ASTM E 162
Bombardier SP 800-C
Rock River Silicone Sealant 100% Silicone ASTM C920 Class 25
TT-S-00230C Class A and TT-S-001543A
FDA No. 421 CFR 117.2600, conforms to FDA requirements
Red Devil HVAC/R High Temperature Silicone Sealant Silicone ASTM C920 Class 25
TT-S-00230C Class A and TT-S-001543A
CEBTP 432.6 140-2
Mil Spec 46106A
CGSB 19C9-9B
DIN 18540 Part 2
OREX 150031-2
Copyright © 2018 QF Ducting. All rights reserved.